-
This sketch hardfaults the board on v1.3.0 of this Arduino Core on the Arduino Nano 33 BLE Sense:
```
void printf_wrapper(const char *format, ...) {
static char print_buf[2048] = { 0 };
…
-
Trying to run the RTCx example sketch on an Arduino Nano 33 BLE and I get the following error.
...\Documents\Arduino\libraries\RTCx\examples\RTCx_example\RTCx_example.ino: In function 'void setup()…
-
digitalWrite 0 from D0 and D1 on Nano 33 BLE Sense doesn't work. Pins are always high. Verified this on 3 different boards
Please use the below sketch to reproduce the issue;
```
//Short D0 to D3…
-
Hi csash7,
Thank you very much for your package. It helps a lot for creating a BLE mouse with the Arduino Nano 33 BLE.
After downloading and including the library I faced an error. After trying…
-
as title. I have my
monitor_filters = esp32_exception_decoder, colorize
in my platformio.ini using an esp32 from lolin.
exceptions are not decoded:
```
Guru Meditation Error: Core 1 panic'ed …
-
## Environment
- Module or chip used: [ESP32-WROOM-32]
- IDF version (run ``git describe --tags`` to find it):
ESP-AT: v2.1.0.0_esp32s2-292-g8c0aab8
ESP-IDF: v4.2-351-gce2c615bb
- Buil…
-
mbed symbols that used to work from Arduino Nano 33 BLE sensor are no longer visible to user code.
Symbols rtos, Thread, etc. are not recognized by the compiler and get error messages,
Using b…
-
/home/wangda/esp/esp-adf/esp-idf/components/lwip/lwip/src/core/init.c:144:2: error: #error "TCP_WND is bigger than the configured LWIP_WND_SCALE allows!"
#error "TCP_WND is bigger than the configure…
QL-AR updated
3 years ago
-
An Arduino Nano 33 BLE with this library doesn't seem to be providing the characteristics for the UART service properly when I connect from a Raspberry Pi.
Using gatttool:
```
[0F:41:1A:9F:75:08]…
-
Hello
I'm trying to lower the data rate to increase the range because I don't need long bandwidth for the transmission, in theory for LE_Coded it's possible to use 500 or 125 Kbits (scheme coded 2 …