-
Hi !
we installed the coolmasternet binding into OH2, then add CoolMasterNet Controller, however status of device is "UNINITIALIZED".
See the picture : http://i.imgur.com/04ifebf.jpg and http://i.…
-
Let's say I have the following configured in my ambientweathetr.net dashboard. The keys shown below are made up (obviously) for the purposes of this example.
appKey = XYZ
apiKey1 = ABC
apiKey2 = DE…
-
In Basic UI when you long press arrows on a colorpicker widget, it send INCREASE or DECREASE command eclipse/smarthome#3009
But in actual milight binding, for COLOR_CHANNEL (the one used for Colorpic…
fab33 updated
5 years ago
-
I am new to OpenHAB2. I started with a fresh install of a 2.3.0-SNAPSHOT, installed the Homematic Binding and then wanted to add my CCU2.
## Expected Behavior
The CCU2 is found correctly.
## Curr…
-
I have a CCU2 running firmware 2.35.16 and Openhab2 running version running homematic binding version 2.4.0 using Paper UI. Adding the CCU2 as a thing was no issue; adding the regular homematic device…
-
## Expected Behavior / Current Behavior
I have installed the lgtv binding into openhab2. the connection is ok, values are showing up and i can control the volume/mute. when i power off …
-
Add the ability to control door locks (Access Control in HAI/PC Access terms).
-
The homematic binding does not add things for internal groups in ccu2 (e.g. INT000001 for a heating including wall thermostat, window contacts and thermostats). The binding in openhab1 supported those…
-
Is it possible to move the Binding Xiaomi Mi IO Binding from the marketplace to the offical openhab store? Problem: On every openhab upgrade I need to reinstall this binding or if forgotten, my xiaomi…
-
Hi,
I'm using openhab2 beta5 together with a ccu2 (firmware 2.25.15) and the homematic binding. The bridge has been discovered automatically via paperui. Channels and items have been created automati…