-
Hi gents,
I successfully flashed my NS Panel howver, I can't upload the TFT file ising the local link and the github link.
There might be something I did worng but I can't figure out what this is.…
-
**Describe the bug**
Reading cached HDF5 wavefunction files (via save_coefs) gives fatal error.
I used a dummy vmc calculation to write the cached wavefunction file, then used the new wavefunctio…
-
mapping values are not allowed here
in "vic.yaml", line 47, column 19:
victron_id: victron0
when trying any examples
-
Apologies if I missed anything in the README, I sometimes skim things a little too vigorously.
I'm looking to use this in an application where the system clock frequency is 48MHz. Are there any iss…
-
Hi Matth,
I am trying to send the meter values like voltage, current, energy, and frequency to the OCPP server. But unable to send MeterValues.req to OCPP.
I added the below functions in the set…
-
Hello there,
im tinkering around with my rpi-pico and want to set it up as a dmx receiver something.
Your library works great when in use with C/C++, but im also uinterested in the Rust lang.
I g…
-
I tryed the methode that the other person had and others tryed but they had no effect i cant get vs to flash firmware to my knomi it gets detected and everything by vs but the flashing will not work
-
Hi, I'm trying to make esphome work under ubuntu by trying to run [Jeff Geerling's example](https://www.jeffgeerling.com/blog/2022/esphome-on-raspberry-pi-pico), but it fails with the error down-below…
-
First of all: many thanks for this adapter!
But I can't get it to work...
After starting the adapter, everything seems to be ok, the instance shows shortly "green" but then it can't connect to the…
-
I have an error when uploading the firmware. It start flashing, then after some time, I am getting an error : ValueError: Failed to write to 0x800B000
Here is the log :
```
➜ libretiny-espho…