-
Any Ideas why Im getting this error
I feel like I'm using a wrong version of RPI OS
but when I in…
-
@Carbon225
I am new to this , might feel like a silly question :).
This is what i understood, connect the sbus tx to the Rasbeery Pi 4 GPIO14 .
Is there any need to use inverter in between the ab…
-
I'm trying to make a small program with DNS feature enabled on Rasberry pi Pico W but it never seem to come past the setup.
In the following program the led is never turned on. I have verified that i…
-
Hello, I have been having issues with configuring configuring a hrtimer-trigger or buffered-trigger for my iio-device. I am using a ISM330dlc (IMU) and it is connected to a rasberry pi cm4. As a drive…
-
### The problem
Mein Octoprint unterbricht einfach die Serial verbindung zum Drucker
[octoprint (3).log](https://github.com/OctoPrint/OctoPrint/files/14409956/octoprint.3.log)
[octoprint (2).log]…
-
## Context
Run [`nwaku`](https://github.com/waku-org/nwaku) in a Raspberry Pi and benchmark it, taking RLN into account. Detects bottlenecks and limitations if any. Write a report with the findings…
-
- The issue is present in the latest release installation Openwrt Image for rasberry pi
- I have searched the [issues](https://github.com/brocaar/chirpstack-gateway-os/issues) of this repository and …
-
I'm trying to get evdev set up on a raspberry pi, and I've gotten it all set up, but when I run it to check that its all running, the ecodes.py file tries to call _ecodes from evdev. There is no file …
-
**Home Assistant release with the issue:**
version: [0.99.2](https://github.com/home-assistant/home-assistant/tree/0.99.2)
**Last working Home Assistant release (if known):**
None
**Operating …
-
In the README, we list a few rpi devices, but the Pico nor the Pico W is not there.
Do we support them?
If we are, on the Pico, should we be using pin GP4 (pin 6 in the below picture)?
https://…
fumin updated
8 months ago