-
Hi,
I was thinking of adding [something like this](https://github.com/kylos101/documentation/commit/7cedd039af5c84e01a554f63f3fce669183b4dab) to audio-config.md.
My problem was that audio was no…
-
Hey,
Docker image is not supported on ARM based devices. Are you planning to support those devices?
-
Hello.
I'm triyng to train my becker blinds, using a centronic stick and this code under home assistant, on a raspberry PI 4. The code seems run without errors. My problem is that when I try to tra…
-
using program lang python3 / golnag 1.13.1 / using usb camera two interface 2.0 product sonnix
test firmware 4.19.50-v7l+ // 4.19.75-v7l+ // 4.19.50-v7l+ // 4.19.93 is same..
but firmware 4.19.…
-
**IMPORTANT**: Before you create an issue, please take a look at our [Issue Reporting Guide](https://github.com/alexa/avs-device-sdk/wiki/Issue-Reporting-Guide).
Hello,
Im using Rasberry pi 3 to…
-
There are occasional intermittent failures in thread related tests.
In an effort to fix dotnet/runtime#10339, it seems worthwhile to track and investigate these.
-
#2926 Expected Behavior
NoderedModule should start
## Current Behavior
NoderedModule does not start with some kind of authentication issue on iMX8Mmini evk board.
See documented issue [here](ht…
-
#### What were you doing?
my printer is far from may computer, so i use Octoandroid since few month to begin the print just beside the printer and then i monitor print from octoprint on my PC... …
-
Trying to use / run P3X on Rasberry Pi. Followed install instructions in README.md.
When trying to run, getting error:
bash: ./P3X-OneNote-2020.4.131.AppImage: cannot execute binary file: E…
-
Sometimes my Denon DN-500AV loses weirdly it's picture in picture-glance. And also acts unresponsive. While all other integrations keeps working, whis one goes weird. I don't have an clue what the err…
ghost updated
4 years ago