-
-
Hello,
I'm testing with streaming music using a2dp over bluetooth on the Pi3. When Wifi is enabled, I get constant buffer underruns wit Pulseaudio (Blueman shows a downstream of around 34kB/s). As so…
-
greetings,
I once have successfully install and been able to collect CSI at summer. But when I want to setup some other device I notice the manual does not work for unknown reason. The issue is `wl…
-
Sometimes, the printing get stuck with the message "Rendering completed". Sometimes it can be fixed by turning the printer off and on. Sometimes, it can be fixed by disabling the printer and enabling …
-
not enough knowledge on this but looking at the source @line +/- 450
/* Return immediately if V4l2 streaming has not yet started. */
if (!dev->is_streaming){
return 0;
}
g…
-
My Alfa AWUS036ACM doesn't support master mode, I thought it worked for AP.. - Raspberry Pi 3B+?
![image](https://user-images.githubusercontent.com/20761682/113221173-7024ec00-927c-11eb-89dd-3843…
-
After the last system upgrade of Raspbian to:
```
pi@hass:~ $ uname -a
Linux hass 4.19.42-v7+ #1219 SMP Tue May 14 21:20:58 BST 2019 armv7l GNU/Linux
```
I am observing a problem with bluetooth, …
-
Hello @thorrak
I have an "IDPRT IT4B" label printer.
I did install it by your PPD file and then added "raster-tspl" to the "/usr/lib/cups/filter" directory.
But I will receive the below error when…
-
Fresh install (git clone), fresh init.
When I try to download from uptobox :
```
26.03.2018 16:04:10 INFO Download starts: s9an865b99fi
26.03.2018 16:04:10 WARNING HOSTER XFileSharing[1]: …
-
Hi,
I tried running the docker line from the README on a raspberry pi running raspbian
docker create \
--name=dashmachine \
-p 5000:5000 \
-v path/to/data:/DashMachine/dashmachine/user_…