-
Cannot get the Buzzer to chime when sending M300 S1000 P1000.
The buzzer works with the LCD button press, but will not work with M300.
Any ideas?
-
Hi there,
Thanks for the great project, which I've been using for some time now. The recently released version v2.0.1 seemed to work OK after I did the necessary reconfigurations; however, after h…
-
#### What were you doing?
I am using this plugin to execute two python scripts through shell scripts, which are designed to use a servo through an Adafruit Servohat to deploy and retract a brass br…
-
With the dual x-carriage, the tools can have a different Z since they move independently (not in duplication mode). I would like to request a feature that enables Z (and maybe also Y) offset right aft…
-
The spec says what overflow:hidden means is [the box’s content is clipped to its padding box](https://drafts.csswg.org/css-overflow-3/#valdef-overflow-hidden), and I believe the padding box of the roo…
-
Running 1.1-RC2 on Kossel Mini with Allen Key Probe (#define AUTO_BED_LEVELING_FEATURE and also #define Z_PROBE_ALLEN_KEY).
G28 command runs fine (all three carriages moves up). On running G29, Z pr…
-
@thinkyhead
I wanted to alert you this thing, I had a lot of people who reported to me a problem with the bltouch. It seems that there is a version, do not know if a clone or a new one that has a ve…
-
Using the latest build and when I issue a G28 command to home all axis the autobed leveller servo tries to swing down but crashes into the edge of my bed and will not trigger. The Z axis is still tryi…
-
Hello,
today i installed the new RC7 release and when the Delta homes the first time, it homes normally but it drives additional 100mm down. So far so good... But when i drive 600mm down and try to h…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
I'm new to Marlin, and relatively new to 3d printing. This is my first printer, Ender-3 with 4.2.2 M…