-
TLTR: taking advantage of esp-idf facilities might improve MP performance and open the way to higher demanding projects.
About 2 years ago I placed my esp32 activities in standby waiting for better…
mfp20 updated
3 years ago
-
### Board
SparkFun ESP32 Thing
### Device Description
The SparkFun ESP32 Thing is a 3rd Party Board based on the ESP32-D0WDQ6-V3 chip with a 26MHz XTAL
https://www.sparkfun.com/products/13907
…
-
### Port, board and/or hardware
esp32-s3 SPIRAM_OCT variant
### MicroPython version
MicroPython v1.23.0 on 2024-10-16; Chroma.tech S3 SPIRAM with ESP32S3
### Reproduction
1. Run any of the I2S ua…
-
### Library/API/IoT binding
System.Reflection.Assembly
### Visual Studio version
VS2022
### .NET nanoFramework extension version
2022.1.0.21
### Target name(s)
ESP32 REV 0 with and without PSRA…
-
### Board
ESP32C3 Dev Module
### Device Description
https://github.com/01Space/ESP32-C3-0.42LCD/blob/main/README.md
![ESP32-C3-0 42LCD](https://github.com/espressif/arduino-esp32/assets/29181943/0…
-
Hi, I looked at your project and I find incredible what you have done. On the other hand, I was wondering if the conversion to a YAML version on ESPHome for home assistant would be possible?
-
Using real numbers this is the actual calculation desired, where m=[0.0, 1.0] is the interpolation factor.
result = round(a + (b - a) * m) (1)
But your blend functio…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi all,
I have a workbee cnc that I originally purchased with an NVUM controller, I was having issues with it and opted to switch to an xPro when it was released. I've had it about a 9 months, set …
-
Ok, I just assembled my Ultimate Bee 1500x1500 ball screw. It has 4 Nema23 steppers. I updated the firmware to CNC_xPRO_V5_XYYZ_BM3D_NC because I have the emergency stop button. When I try to move a…