-
Sorry to move it here, but since you manage this repo I think none will regret.
I had possibility to talk to a guy that develop HW by job. I have some info that have to be considered about resistor…
-
I'm playing with `samples/net/sockets/dumb_http_server_mt` sample on `nucleo-f429zi` board. I have tried several network stack configurations and found out that when I increase number of `NET_TCP_BACK…
-
issue https://github.com/adafruit/Adafruit_HX8357_Library/issues/25 is resolved,
the example code has the wrong pin definitions.
instead of
#define TFT_CS 10
#define TFT_DC 9
#define TFT_RST 8…
-
I've got a CircuitPython hang that I've seen on 4.1.0 rc0 and rc1 if I leave some code running. Takes about ten minutes on a PyGamer to hang, it's not predictable but will do it on about one in four e…
-
As noted here: https://github.com/adafruit/uf2-samdx1/pull/45#issuecomment-460876018 by ladyada 😱
The ESP32 can run firmware that allows us to interact with it from the SAMD51 using SPI. For simpl…
-
I'm bringing up a board I made that has a SAME51J20A. When I picked the SKU, I just assumed that the SAME51 components were implicitly in the "SAMD51" family. Based on the datasheet, the only differen…
-
I watched the video about **JFrog Bintray** and tried to make it work here. Follow the steps that I did:
1. Created an account on Bintray
2. Created a repository called WStation
3. Created a pack…
-
There seems that there is an issue in either i2c_bits.py or i2c_device.py. When I run the INA219 CircuitPython example, it errors out. The correct address has been entered as I tried with an incor…
-
**Describe the bug**
When trying to build the latest master with GCC 7, the build fails due to the compiler option `-fmacro-prefix-map` not being available.
**To Reproduce**
Steps to reproduce th…
-
When a feature was merged in to allow calibration persistence, adding `#include ` caused compilation for the SAMD51 to stop working. I need to go through and add some IFDEFs around it so it still work…