-
### The problem
The CST816 touchscreen component, during setup() and particularly continue_setup(), reads a register from the I2C bus asking the touchsreen controller its chip ID register. If this …
-
**Please acknowledge the following before creating a ticket**
- [x] I have read the GitHub issues section of [REPORTING-BUGS](../blob/master/REPORTING-BUGS).
**Description of the bug:**
When …
-
Due to the large number of the pins in the new ECP5 boards, the pin's names has to be larger.
Actually Icestudio only shows 5 characters in the pin's field.
Please could you allow to show names with…
-
Hello.
I am not able to connect an I2C sensor (BME280) to the Heltec Wifi 32 Kit. I have connected the BME280 to Pin 22 => SDA and Pin 21 => SCL. But I get always the response "No I2C Device found". …
-
I thought it shouldn't take long, but this line:
va = sda.VideoAnimator(gpu=0) # Instantiate the animator
has been running for over an hour. Is that supposed to be right?
-
Hi Kris,
Thanks for the great code. I have managed to obtain the accelerometer and gyro datas, however my magnetometer datas give out only zero values. When I run the code, I managed to get the out…
-
Hello,
I use smartmontools to monitor the temperature of this drive: TOSHIBA THNSNF128GMCS. The drive is inside an enclosure visible as "ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E…
-
I want to mount a Fusion Drive on an iMac with MacOS 10.14. I am running a Ubuntu 19.10 from USB flash drive and compiled fuse-apfs from the latest git repo.
It is an iMac late 2015 so there is no TP…
-
Code is working fine on Mega2560 but when using the code and/or i2c scanner code on Uno with SDA and SCL connected to A4 and A5 respectively.. they are failing to detect the device
-
E:\>aff4imager.exe -dd -o E:\output.aff4 -i /dev/sde --format raw --volume_format raw
2020-03-27 13:28:35 I This is The WinPmem memory imager. version 3.3rc2
2020-03-27 13:28:35 I Output volume is…