-
Is it possible to frame-synchronize two MLX90640 sensors so that they take a reading (image) exactly at the same time? Is it possible to have a synchronized "video stream" from two sensors where the i…
-
Hello,
I bought an analog IR distance sensor (https://www.robotshop.com/en/sharp-gp2y0a21yk0f-ir-range-sensor.html) and wanted to test it on the motor-shield. I've connected VCC to +, GND to -, and…
-
and replace it by some generic makeXMLObject thingy
Migrated from http://sumo.dlr.de/ticket/2684
```json
{
"status": "new",
"changetime": "2017-01-31T20:09:11Z",
"description": "and rep…
-
Thanks for the great plugin, it works reliably for me and I'd like to make an improvement suggestion.
When configuring it for both eve and home app, it current exposes the following occupation sensor…
-
I noticed that my unraid array drives were no longer spinning down after implementing this integration with homeassistant.
Can we increase the maximum update interval from one hour to at least 12 ho…
-
Add gui for setting up sensors/switches/binary_sensors that will allow the user to add to their alarm with out having to make code changes and flash to the board.
-
This is a very small issue. I have zigbee sensors to detect when the shutters on my split systems are open or closed. Previously the status displayed as open/closed but after a recent update they no…
-
A second set of low-cost IMU Sensors have been used in the first (now old) sensor hardware. The current sensor hardware does not support a second set of sensors. I thus would like to cleanup the data…
-
1. Stratux version: Latest
2. Stratux config:
SDR
- [x] single
- [ ] dual
GPS
- [x] yes
- [ ] no
type:ublox9
AHRS
- [x] yes
- [ ]…
-
Okay so what I have come up with is the following: read out the data of the sensors directly (needs physical manipulation), read out the raw data from the sensors to jump over the part where the senso…