-
Dear developers,
I have tried to successfully compiled "**SlenderBody**" source code on a cluster and the output was attached in here. However, when I try to run an example using this command"pyt…
-
### Describe the bug
dpkg: error processing package initramfs-tools (--configure):
### Steps to reproduce the behaviour
```
$ sudo apt update
$ sudo apt -y full-upgrade
Reading package lists...…
-
-
Hi, since yesterday's MTD patches, my TP-Link Archer C7 v4 doesn't detect/show any network devices apart from the loopback device. Also, it now throws 4 `OF: Bad cell count for /ahb/spi@1f000000/flash…
-
### About me
I'm senior engineering manager at Spin for all Partner integrations including compliance. In that role I have been on the [OMF Technology council](https://github.com/openmobilityfoundati…
-
Hi,
I thank you in advance for your work.
I have a problem at the "Setup UBIFS partition" step
I don't have a rootfs partition but a root partition.
I replace it with a partition named rootf…
-
I use the BTT PiTFT50 without problems.
After the update, i can see klipperscreen on the display, but touch did not work anymore.
I use MainsailOS 32bit Bullseye.
Klipper v0.11.0-128
Moonraker v0.…
-
### Describe the bug
Im trying to connect two GSC cameras to RPI5 and camera connected to CAM0 doesn't work.
After swapping the cameras in place, the situation is identical.
When i connect GSC to C…
-
Hi,
I am getting a "Unable to handle kernel paging request" every several hours. The system reboots after the message but stays frozen. Only power off / on brings it up.
```
====== system ======
…
-
## Expected Behavior
E5785 is visible as cdc_ether and allows internet access using it's own gateway IP 192.168.8.1
## Current Behavior
Doesn't work at all.
It's visible as /dev/cdc-wdm0 but l…