-
### Board
ESP32 S3
### Device Description
ESP32 S3(FN8 chip or FR8 chip) have 8MB Flash , DIY Board reference to hardware manul
### Hardware Configuration
[env:esp32s3]
platform = https://github…
-
I was trying out this great firmware, but after first omitting the `ota:` part (due to using an older esphome), i soft bricked my device. However, regardless on how i configure ota, i cannot update my…
-
Hi all!
I'm on fw 2020.05.11
I'm can control fine my IKEA button E1743 but it's not in your supported devices list
All commands are ok, but I can't retreive battery percentage.
Here messages pub…
-
Hi,
First I want to thank you for the amazing work done here!
I'm super happy to see that we can now use new Tuya devices :)
I have bought a LSC Smart Dimmer Switch (same as https://github.com/…
Bacto updated
6 months ago
-
Hi,
leider kann ich dich anders nicht erreichen, daher als Github Ticket:
Ich versuche auch mit meinem eigenen Lesekopf Daten an Tibber zu senden und bin dabei auf dein Projekt gestoßen.
Hast du …
-
### The problem
I know the esp32-c6 is not officially supported (why actually? It's old enough and sdk is feature complete enough as well).
Still i would like to be able to compile esphome for thi…
-
### The problem
Newly discovered Tasmota devices though MQTT does not show controls entities up until home assistant is restarted.
Steps to reproduce:
- Either connect entirely new device to MQTT…
-
### PROBLEM DESCRIPTION
I am trying to set up button control for my shutters. Single, double, and triple press commands are working as documented, but I am unable to make the hold command work.
…
-
### PROBLEM DESCRIPTION
I use a Shelly 2.5PM. Relay one is used to measure the power usage towards my EV. There is no button attached. The second relay is used to switch the light in the carport…
-
### What happened?
After updating zigbee2mqtt to version 1.37.0 in HA I fond repeated frame parsing error in the log:
`[2024-05-04 11:50:24] error: zh:ezsp:ezsp: Frame changeSourceRouteHandler pa…