-
Currently software display drivers that implement support for displaying main framebuffer contents on displays interfaced via the SPI bus are resorting to periodically polling snapshots of the screen …
-
Hi, I have a problem with my display. My board is an M5Paper (fully updated). I added a new 1-meter long flat cable compared to the 20 cm one provided, and I'm experiencing strange ghost inputs. Init…
-
### SOC
ESP32
### Lora IC
DL-CC68-S-868
### Product Link
https://www.samsclub.com/p/circuitmess-chatter-stem-project-build-and-code-walkie-talkies/PL980418145
### Description
Requesting reconsi…
-
### The problem
When trying to upload a TFT file to the Nextion display in my NSPanel, I am always getting "Reading from UART timed out at byte 0!".
When flashing Tasmota and uploading the berry d…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Following the instructions laid out here: https://www.reddit.com/r/ender3/comments/10sx1lr…
-
Will you support the new M5Stack Core2?
-
PROBLEM DESCRIPTION
Auto Update Nextion from 53 / V4.3.3 to 54 / V4.4.0 update run -> done but not install
REQUESTED INFORMATION
Make sure your have performed every step and checked the applicabl…
-
When trying to do the repeatability test from the Touch display, it homes X and Y then tries to home Z but ignores the Zmin limit (not the probe), hence, crashes the nozzle into the bed.
I should a…
-
**Describe the bug**
I updated the title since this is solved and I was too lazy to make just another Issue to figure out the PSRAM issue.
The fact is, even if I add the attributes for external RAM…
-
### Operating System
MacOS
### Arduino IDE version
1.8.19
### Board
Adafruit Feather ESP32-S3 Reverse TFT
### ArduinoCore version
latest ESP32 BSP
### TinyUSB Library version
latest
### Sket…