-
Traceback (most recent call last):
File "", line 148, in
File "MicroWebSrv2/microWebSrv2.py", line 136, in LoadModule
MicroWebSrv2Exception: Cannot load module "WebSockets".
-
I am using a Hope RFM95 (915 Mhz), spread factor 10, default bandwidth, module soldered onto a ESP8266 plate with resistors removed and SMA connector soldered onto the plate.
I read other peoples …
-
### Board
ESP32 wrover dev
### Device Description
Brand new ESP32 Wrover Dev board with Camera, tested with wifi scan and that worked.
### Hardware Configuration
No
### Version
latest master (c…
-
### Port, board and/or hardware
windows port, linux port, esp32
### MicroPython version
MicroPython 91f4a6b on 2024-08-08; linux [GCC 14.0.1] version
MicroPython 91f4a6b on 2024-08-08; win32 [GCC …
-
Unable to turn off OLED display by inhibit "Always On"
I suspect something else may be keeping it alive
The intended use is a solar powered i-gate that will only digipeat to other locations with WiF…
-
What version of esp-idf need to build?
Using current version and getting an error:
```
CC build/main/esp_pdp8.o
In file included from E:/msys32/home/User/esp/ESP32-pdp8-simulator/main/esp_pdp8.c:3…
0un updated
10 months ago
-
Hi
I try to use your code to get my TTN T-Beam 1.1 following explanations included but whatever I use OTAA or ABP mode to join TTN network it never shows up on TTN network !
I have edited the file…
-
Hi,
is it possible to add support for an Inkbird ITH-20R for esp32 with cc1101 i am not sure how to add additional decoders. a link for it working with rlt_433 is , https://github.com/ehagan/rtl_4…
-
Hello everyone,
I am trying to get AFSK (and later AX.25) running on my TTGO T-Beam (Hardware Revision 1.1). The LoRa Module is SX1278. I tried a lot but to make it simple and avoid other sources o…
-
Hi, thanks for the great project!
This is probably not your issue, but I just would like to share my experience with this mic for measuring environment noise.
While doing some experiments I no…