-
That way folks who install it have a file to edit. Bonus points if there is a very small bit of useful code. (Maybe just `print("Hello world!")`? It could be the translation too.)
-
and i am doing something wrong ?
-
Blip doesn't use a bootloader since it has bootloader on board, however there is only `.UF2` link on board page. I do see that some boards do have a `.bin` download link (maybe even `.hex`), for examp…
-
Hoping to experiment a bit with these. Very low priority
-
Hi,
I don't know where to ask questions elsewhere...
- Do you use the "normal" ItsBitsy UF2 Bootloader for the 48pin variant of the CP32-M4
? (from here: https://github.com/adafruit/uf2-samdx1/…
-
I'm following [this spi oled guide](https://learn.adafruit.com/adafruit-oled-featherwing/circuitpython-and-python-usage#spi-initialization-8-15) to program my [128x32 SPI oled](https://learn.adafruit.…
-
Hi,
Thanks for sharing your project, is the `Middlewares\ST\STM32_USB_Device_Library\Class\UVC` source 'custom made'? I'm planning to develop some USB custom classes but i haven't find much informa…
-
This binary does not appear to be working with the April Brother dongle as the v0.1.3 did.
Steps to reproduce:
1. Connect April Brother nRF52840 Dongle as removable drive NRF52BOOT.
2. Copy logita…
-
Pull request #2018 adds support for SnekBoard, which is a SAMD21G18A board with 9V motor controllers for use with Lego Power Functions motors and sensors. I'll need a 'real' USB VID/PID before this pu…
-
If you are showing something on the neopixels and reset (or go into the bootloader), the last thing being displayed on the neopixels will continue to show (i.e. they don't get turned off)