-
Issue:
The Needle agent (v1.0.2( crashes when I run a command from my connected Desktop.
The agent is sitting in the foreground and once I run a Command the agent closes and the command pauses.
…
-
On 2nd ESP, Devices appear Configure Sensors/Pins page, however when assigned they do not install (similar issue to that happened on brewpi that could be fixed the esprom reset) similar reset doesn't …
-
I'm trying to connect to an MQTT broker via WiFi. I'm able to execute the connection (I see it logged on the server), but when my client tries to read the answer from the server it fails, with the fol…
-
Due to Lithium Polymer (LiPo) batteries, there is a persistent knocking of the Relays on the USB-Switch.
Issue has been targeted by calculating the current from the Pi when the LiPo battery is compl…
-
Is there something we can do about it?
https://github.com/subliun/Antox/issues/6
-
Hi,
this is maybe not a software stack question, but maybe others faced same problem and solved it already:
How do I connect my ESP's RX/TX pins to a serial device and having at the same time the CH…
-
Here is the following scenario
**Setup:**
We are using Atmega644 PA-AU and trying to drive AC Contactors via relays. The relays are based on Johnny-five Relay Class through StandardFirmataEthernetPlu…
-
This currently suports the Sainsmart 4- and 8-channel relays which use FTDI, but the Sainsmart 16-channel uses USB-HID, and looks different from the current hidapi driver.
Has anyone tried the Sainsm…
-
Hi,
I just tried one of these USB Hid relays (http://vusb.wikidot.com/project:driver-less-usb-relays-hid-interface) and purejavahidapi crashes on:
´´´java
PureJavaHidApi.openDevice(devInfo.getPath())…
-
I have custom protocol that I'm working on(https://github.com/vvanders/nbplink) that I was hoping to use Direwolf as a raw KISS TNC for Signal Link and other soundcard based radio interfaces.
With th…