-
### Answers checklist.
- [X] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/) and the issue is not addressed there.
- [X] I have used th…
-
Hola,
Does DeviceScript support M5Stack?
https://www.m5stack.com/
If yes then I’ll buy one of their devices and continue experimenting with your VS Code plugin.
-
roslaunch rplidar_ros rplidar.launch
... logging to /home/jetson/.ros/log/6d81d10c-4069-11ec-83a4-401c8380b7e0/roslaunch-jetson-desktop-8743.log
Checking log directory for disk usage. This may take …
-
Hey, I'm trying to output the data that is sent out the 32u4's USB to that, but also out to a ESP8266 so I can send it to a web server, I was wondering if you knew what changes I could make to accompl…
-
**Describe the bug**
Sometimes, one of the kworker theards ~gets stuck~ and continuously uses around 20 % of the EV3 CPU. *EDIT: this is normal behaviour, nothing gets "stuck" in the typical sense.…
-
```
What steps will reproduce the problem?
1. Synthesize r-VEX using ISE10.1
2. Create SystemACE file using impact and copy to CF card
3. Boot XUPv2 board from CF card, connect USB-UART adapter or rea…
-
**Describe the bug**
WiFi client stops working and does not recover (Cypress firmware crashes). This happens to my RPi4 almost every day and I must reboot to recover it. After reboot, it always wor…
-
Hi. How are you planning to send data to computer from flight controller. Through UART connected to microusb?
-
@honorpeter Would you please upload your kernel config file as I mentioned before, I think there might be some config about module sig that has not been enable.
_Originally posted by @eleICoto in h…
-
@nyanmisaka found that the USB Bluetooth for AX210 only works on a cold boot. When entering the command `sudo restart`, the Bluetooth USB disappears. This has been observed on the 5.10 and 6.1 Rockchp…