-
```
What steps will reproduce the problem?
1. Connect one of the new XBee PRO S2B radios
2. Run any of the test programs
What is the expected output? What do you see instead?
I expected: XBee radio i…
-
```
What steps will reproduce the problem?
1.error occurs when I`m trying to connect APM by the radio modem
What is the expected output? What do you see instead?
PrintScreen is attachments.
What ver…
-
```
To reproduce the issue
1. Setup two xbee ZB radios to be able to communicate (libxbee talks to the
coordinator, the other is set as router)
2. Setup a Remote AT from one radio to another in "xbee…
-
```
What steps will reproduce the problem?
1. Tested with elevon mixing on, but may exist in other modes
2. When you switch into Stabilize mode, throttle goes to 50% and cannot be
manually overridden…
-
```
What steps will reproduce the problem?
1. Tested with elevon mixing on, but may exist in other modes
2. When you switch into Stabilize mode, throttle goes to 50% and cannot be
manually overridden…
-
```
What steps will reproduce the problem?
I am using also the commands to send serial data to and from the xbee module in
my application. I added the following commands to your library (0x10+0x8B an…
-
```
What steps will reproduce the problem?
1. Set radio to give you first switch at PWM pulsewidth > 1620 && pulsewidth
-
```
What steps will reproduce the problem?
1. Try to transmit a file (+-200Kb) to a remote Xbee.
What is the expected output? What do you see instead?
Work with 1150200 speed and the file be trasmite…
-
```
What steps will reproduce the problem?
1. Tested with elevon mixing on, but may exist in other modes
2. When you switch into Stabilize mode, throttle goes to 50% and cannot be
manually overridden…
-
```
What version of the product are you using? On what operating system?
I am using version 360 on linux
Please provide any additional information below.
Do you plan to integrate series2 functions al…