-
I have the same problem with the Dlink DCH-Z110 door sensors and the Fibaro FGDW-002. The ZwaveJS2Mqtt is working fine, but domoticz does not reflect state changes
-
I have multiple doors sensor that have never failed like this when using a different platform. Since I switched to zwavejs2mqtt I get false states on all sensors from time to time.
Interestingly if…
-
First thank you very much for this information and conversion tool.
I was doing some testing between an Aeotec Z-Stick 500 plus and a SiLabs UZB-7. Restoring to the 700 series stick.
I have …
-
# Problem/Motivation
I have the zwavejs2mqtt add-on running on 2 different instances of Home-Assistant supervised.
Today I found out that the add-on was restarting more or less every 5 minutes with …
-
Hi,
One of my nodes went dead and the docker container closed, and now everytime I try to start it, it begins to load then exits again.
Full log is available here: https://pastebin.com/kqW3Hug7
…
-
**Is your feature request related to a problem? Please describe.**
There seems to be large variance in how zwave devices behave. There are decisions in this project regarding how they should behave.…
-
### Is your problem within Home Assistant (Core or Z-Wave JS Integration)?
YES, BUT a Home Assistant developer has told me to come here
### Is your problem within ZWaveJS2MQTT?
NO, my problem is NO…
-
Please see forum issue [https://www.domoticz.com/forum/viewtopic.php?f=6&t=31559](https://www.domoticz.com/forum/viewtopic.php?f=6&t=31559) which has problem investigation and debug evidence.
**Ve…
-
The "MH-S220 One-Load+" does not switch the relay via sw1, well via sw2
However the device's relay is switching sw1 and sw2 in the Open Z-Wave Control panel and toogle switch
Found this in the lo…
-
### Is your problem within Home Assistant (Core or Z-Wave JS Integration)?
NO, my problem is NOT within Home Assistant or the ZWave JS integration
### Is your problem within ZWaveJS2MQTT?
NO, my pr…
kpine updated
2 years ago