-
AttachInterrupt() is not in the supported list, but pin interrupt is supported by the chip itself.
Is it possible to add it?
-
Thank you for the work last week with micros() on trying to get the Renesas platform 48 MHz Arduino R4 boards to run the SDI-12 library. When we updated the SDI12 library, the examples would compile …
-
The `boards.txt` has no softdevices as possible selections.
https://github.com/sandeepmistry/arduino-nRF5/blob/75baa76b21ec28cf7c6ece57ba444cf2306b584b/boards.txt#L84-L88
Can bluetooth functiona…
-
got some progress to port to LA915. I rebuilt the AU915 files.
Start
Setting TX Config: modem=MODEM_LORA, power=30, fdev=0, bandwidth=0, datarate=10, coderate=1 preambleLen=8, fixLen=0, crcOn=1, fre…
-
Now that the [Arduino Nano 33 BLE](https://store.arduino.cc/nano-33-ble) and [Arduino Nano 33 BLE Sense](https://store.arduino.cc/nano-33-ble-sense) have been released and introduce:
- First genuin…
-
Hello,
I installed Arduino IDE at one of my PC which has Intel Xeon CPU E5-2630. (Windows7 Enterprise 64bit)
And it returns compilation errors for every examples like below.
But if I changed …
eziya updated
3 years ago
-
Hello,
I successfully tested the example "PlayAACFromPROGMEM". When I add an analogRead (any pin), my ESP32-WROOM-32U gets stuck in a boot loop. I guess that this might not be a library problem but…
-
Arduino: 1.8.15 (Linux), Board: "ATmega328, Yes (UART0), EEPROM retained, 328P / 328PA, BOD 2.7V, LTO disabled, External 16 MHz"
arduino-builder -dump-prefs -logger=machine -hardware /usr/share/ard…
-
### Board
ESP32 38 pines NODE MCU
### Device Description
I'm developing a project of telemetry using esp-32. I put the codes with the libraries and when i pressed the "ESP-IDF: Build `Project" loo…
-
```
What steps will reproduce the problem?
1. Create empty arduino project
2. configure makefile to arduino leonardo:
# Arduino Leonardp
ARDUINO_MODEL = atmega32u4
ARDUINO_PROGRAMMER = arduino
ARDUIN…