-
The website has been successfully updated, but the Readme on the github page does not render the styling of the tested boards table.
If I am correct, this readme is not linked to the website direc…
-
Hi,
I just bought the Arducam Mini 2MP camera and I was trying to get the functions demo working today. I installed the arducam library into the Arduino/Libraries folder and updated memorysaver.h to …
-
using: Ubuntu-22.04, with avrdude 6.3-20171130
Flashed one usbasp (atmega8) with another usbasp (v1.02), this went fine,
When I plug this new usbasp-1.11 into an USB port I get this:
```
lsu…
-
Hiya, I've just built a couple of these - awesome project btw! - and seem to be running into various issues. I've re-formatted my uSD card a few times, using both Windoze and also the SD Formatter to…
-
Hi,
When doing a write transaction, I'm getting the wrong status in TWSR after sending the address. I'm reading 0x28 which stands for data write w ack, I was expecting 0x18, sda+w w ack, which is als…
20Mhz updated
3 years ago
-
Hi,
I've faced an issue trying to connect to a website using HTTPS. Not sure how to reproduce it. It just happens once a few hours of every minute requests.
I am using a code from the example fold…
-
In using the ArduinoComponents library, I found that I needed a RotaryEncoder component. I wrote one that makes use of TactileButton. I don't know if you'd want to include it. But here are the .h & .c…
-
https://github.com/MaslowCNC/Firmware/blob/2c4e420c08a2f5a7c0f0ae39fe15e5b04f6c8a94/cnc_ctrl_v1/Axis.cpp#L259-L264
I've been hunting down an issue in some custom firmware I'm working on and believe…
-
WebControl Maslow Holey firmware upgrade error
- * So I am not sure if you wanted to have it ready or if it was ready but I tried to update the firmware to holey so I could calibrate my machine …
-
Hi Mr Pham Cong Duc,
I used Arduino Pro Mini in its 3.3v, 8MHz which connected the HopeRF RFM 92W (Low-cost LoRa Iot Device: A step-by-step tutorial). But when i removed the power led and the board …