-
Over the weekend I got a Class 10 SD card to work with the Metro M4 and Adafruit WINC1500 shield by slowing the SPI clock down to 12 MHz. This week I integrated the Seeed Ethernet 5500 shield with my …
-
Compiling POCL for i686-linux-gnu with LLVM 16 (FWIW, I'm cross-compiling from x86_64-linux-musl) results in:
```
[14:40:42] ninja: job failed: cd /workspace/srcdir/pocl/build/lib/kernel/host && /…
-
```
When attempting to burn a bootloader using either the IDE Burn Bootloader option
or any of the Makefiles down in the hardware/arduino/bootloaders/xxx
the fuses will be burned and the flash erased …
-
```
When attempting to burn a bootloader using either the IDE Burn Bootloader option
or any of the Makefiles down in the hardware/arduino/bootloaders/xxx
the fuses will be burned and the flash erased …
-
```
When attempting to burn a bootloader using either the IDE Burn Bootloader option
or any of the Makefiles down in the hardware/arduino/bootloaders/xxx
the fuses will be burned and the flash erased …
-
```
When attempting to burn a bootloader using either the IDE Burn Bootloader option
or any of the Makefiles down in the hardware/arduino/bootloaders/xxx
the fuses will be burned and the flash erased …
-
At Mixxx, users reported problems with USB 2.0 High-Speed devices, which are limited to Full-Speed mode for some reasons. Under MacOS and Windows they operate as High-Speed device.
This is not only…
-
via conversation with @ajfisher on gitter:
There was a pull-request for SPI opened a while back: firmata/arduino#135. However, it's going to be more complex than just wrapping the Arduino SPI api (si…
-
I was playing with the STM32F401CCU6, which is the blackpill development board. I found that the keyboard stops responding if I use that keyboard to wake the host computer. After adding some LEDs ev…
-
Good afternoon. I took this library as a basis and faced the problem of changing the value in an array cell. what might be the problem and how to get around it? piece of code:
```c++
uint8_t Nomer_…