-
Hi,
I want to make a build with DS18B20 but i can't find in the list (i make a search in the file).
I see dht11 but not DS18B20.
I think his hide with an other name ;o)
Thanks
-
i get this error when verify my code, to upload to the esp32 board
```
error: 'using SinricProTemperaturesensor = class SINRICPRO_3_0_0::SinricProTemperaturesensor' {aka 'class SINRICPRO_3_0_0::Si…
-
I have 2 FGBS001 sensors.
I use them to read temperature values of DS18B20 temperature sensors.
The DS18B20 sensors are detected correctly and the temperature values I get are OK.
But, from time …
-
There is a request to implement the Domoticz MQTT command set. This will require a new build in parallel with existing builds as the Domoticz requirements will not fit in builds that have Home Assista…
-
Is there a list with all the sensors and controllable elements the system has? Along with what protocols they use? This is what I reverse engineer from the manual:
| Qty | Region | Item | Descripti…
-
I finally found a board that **REQUIRES** an external antenna instead of trying to move that silly little resistor.
I stuck some code in that does seem to serial print the RSSI I just stuck it in t…
-
I am using the `HeishaMon v3 communication PCB` and have been using it fine for about two years now.
For the second time now (first time is about one year ago), I recently noticed that there were co…
-
Hello,
I have noticed unexpectable readings from 2 ds18b20 connected to the same 1-wire bus (1 common pull-up resistor 4.7k).
All sensors are set to 12 bit resolution, but it seems that 2 of them …
-
I am having problems with the wall clock rebooting when I switch to it or apply to the NTP settings.
I see sometimes I get an error that the NTP time could not be updated.
Is there a wait time for i…
-
### 描述一下这个bug / Describe the bug
驱动DS18b20失败,无法正确读数。同样的程序在esp32c3中可以正常准确读数。
### 复现步骤 / To Reproduce
```cpp
/*********************************************************************
——————1.开发环境…
stosc updated
10 months ago