-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Command from processor:
AT+CONFMODE WPKCBXDGW8I09HI5W326J4QKMBJ9
Results in an advertisement that is not the same. In addition, the POP mode is enabled in the app when this happens.
(Note the…
-
```
on my atmega328p:
I have L/H/E as C6, DC, FD (I want brownout under 3.3v)
Lock bits are EF
I don't think that is what the makefile does.
```
Original issue reported on code.google.com by `tz2…
-
`CC [M] /home/mark/git/rtl8821CU/os_dep/osdep_service.o
/home/mark/git/rtl8821CU/os_dep/osdep_service.c: In function ‘rtw_change_ifname’:
/home/mark/git/rtl8821CU/os_dep/osdep_service.c:2494:28: wa…
-
I have a problem compiling the driver under the Truenas Scale (kernel 6.1.63-production+truenas). The error message is the following:
`/var/lib/dkms/rtl8814au/5.8.5.1/build/os_dep/linux/os_intfs.c:…
mlsok updated
6 months ago
-
For Windows there is BLFlashCube and for Linux, there's a binary of flash_build, but not really the source. This is problematic for developers on MacOS (with two processor types), Raspberry Pi, or dev…
-
I have successfully flashed the programme onto my esp32 as seen from the log below. However, at the end I am expecting to see csi data at the end of this as it says on your tutorial "this will flash t…
-
- Development Kit: N/A custom PCB
- Kit version (for WroverKit/PicoKit/DevKitC): [v1|v2|v3|v4] : N/A
- Module or chip used: [ESP32-WROVER]
- IDF version: v4.1-rc
- Build System: [idf.py]…
-
New RISC-V based wifi SoC called ESP32-C3 was announced https://www.espressif.com/en/news/ESP32_C3
Unlike the Bouffalo Lab MCUs ( #559 ) this might actually be easier to support, since it is expected…
-
Installed the tool and the kernel on UDM (not Pro), and then try to boot the custom kernel.
```
root@ubnt:/# udm-bootctl list
Version Initrd
4.19.152-edge…