-
So this is a bit of weird issue. I'm not sure if this is specific to the QMK firmware, the keyboard itself or something else entirely.
When I have my ErgoDox EZ connected to my computer (running El C…
-
I've created the attached keymap_dvorak to replace the essentially empty tmk_keyboard-cub_layout/keyboard/ergodox/keymap_dvorak.h.
[keymap_dvorak.h.txt](https://github.com/cub-uanic/tmk_keyboard/file…
-
Hi gentlemen!
Just came across the documentation for a feature I've anticipated for a while now, thanks so much for your hard work into making it :)
Since the leader key is basically just a "tap" key…
-
@Lknechtli, reported this in #503, and I'm creating an issue for easier tracking and discussion
> I've noticed that while starting up, the infinity can sometimes get into a weird state where the keyb…
-
i used it like this https://github.com/pvinis/qmk_firmware/blob/pvinis/keyboards/ergodox_ez/keymaps/pvinis/keymap.c
it should type `A` or `B`, and `C` or `D` with the `BASE` layer top left buttons.
…
-
Latch keys do not seem to work as expected.
No matter w…
-
I built this project successfully on Mac OS X Yosemite using the provided instructions. However, the LGUI and RGUI keys are never registered (regardless of where they are placed). All other keys funct…
-
Currently you have to run different make commands for different keyboards, in order to upload the firmware.
I think we have at least the following
1. dfu - which runs dfu-program
2. teensy - which ru…
-
According to https://www.massdrop.com/buy/infinity-keyboard-kit
the pcb now supports leds and other changes both github and https://input.club/devices/infinity-keyboard don't reflect these changes.
-
At https://ergodox-ez.com/pages/our-firmware we read that:
> Massdrop, the innovative startup behind the ErgoDox kits, has an online graphical configuration utility which you can use to easily create…