-
hi,
please i need to compile mote z1 under riot but when i launch BOARD z1=make it display error arch32, i try to upgrade msp430-gcc-4.6.3 to 4.7.3 but it's failed..please i need help
best regards
-
As we discussed on the twitter: https://twitter.com/oe1cxw/status/821646243101372417 it would be nice to have support for the latest / greatest FPGAs. Created this ticket to scope the work need to be …
-
Thank you very much for this. It has inspired me to attempt to build something similar using Micro/Circuit Python.
Do you happen to know if [Adafruit Feather M0 RFM69 Packet Radio 433 MHz ](https:/…
-
Re these threads:
https://forums.adafruit.com/viewtopic.php?f=57&t=160689
https://forums.adafruit.com/viewtopic.php?f=57&t=137134
Recreated.
Appears to be related to toggling of the clock line…
-
Complete details provided in this post:
https://forums.adafruit.com/viewtopic.php?f=57&t=158718
Feather M4 Express does not launch user code because memory locations at the beginning of unprotecte…
-
- **OS and version used:**
Running on Adafruit Feather M0
- **SDK version used:**
Using the libraries available in the Arduino IDE (AzureIoTUtility) v1.0.45
# Description of the issue:
My dev…
-
- Arduino board: M0 Feather WINC1500 with latest firmware and SSL
- Arduino IDE version: 1.8.10
My sketch has been saving data to Adafruit IO without problems for hours, then stops for no apparen…
-
**Describe your question or issue**
Hi
Finally I retried the sample program for OTAA on Orange LiveObject and I have the same problem I have on my projects : Payload are not sent or disappear be…
-
Hi, I've been recently working with the ATSAMD51 and come to test it with some FRAM. However, it seems like the hardware spi mode has some issues.
- Arduino board: ItsyBitsy M4 (SAMD51)
- Ardui…
-
`arduino-cli` cannot upload to Circuit Playground Express using FQBN (_Fully Qualified Board Name_) `adafruit:samd:adafruit_circuitplayground_m0`
Error reported:
`Error during Upload: cannot exe…