-
They is no sensor for water tank current temperature and set temperature. Unable to create a graph for it. But it is for indoor and outdoor temperature.
![image](https://user-images.githubusercontent…
-
Verify correct available heat and excess air results on calculators:
Efficiency Improvement
o2Enrichment
Air Heating
-
I'm looking for a way to read out the space requirement (dt. Raumanforderung) 0 or 1 in the ioB adapter. As is well known, the space requirement is set to 0 if there is no need for heat in any of the …
-
Since the voltage is measured by resistor divider, it will be affected by the temperature drift of the resistor, and the heating effect of those 20Ω resistors is still very obvious. I decided to add a…
-
Hallo Leute,
wenn ich das richtig verstanden habe, wird die Temp 2, auf die das Wasser per oneTimeCharge erhitzt wird, im Adapter unter
heating.dhw.temperature.temp2.value
ausgegeben.
N…
-
I use the hot water setpoint in my setup. Since yesterday, the feature getDhwTemperature() (=heating.dhw.temperature) is no longer available. After comparing the complete rawjsondata, I noticed that t…
-
This has been mentioned in several other issues but as far as I can tell no solution has been found. Other stepper libraries allow passing in an absolute current limit in milliamps given an Rsense val…
-
![Skärmbild 2024-03-04 233629](https://github.com/larry-athey/rpi-smart-still/assets/98463572/ac454377-b40c-4fe9-ae18-6f96cd5d0ebf)
Sorry for all the mess I tried to follow your instructions …
-
### Problem description
I bought this Moes Thermostat to control an electric underfloor heating system : https://fr.aliexpress.com/item/1005004996552864.html
The device deosn't show ANY entity !
…
-
I also have a diesel heater that can be controlled via Bluetooth via the app. What hardware do I need so that the home assistant connects to the heating? an ESP32? ESPHome? Thank you very much for thi…