-
Hi,
I have a ESP32 Heltec V2 Lora board. I use this ttn-esp32 firmware pack. I try to send a sensor data to the chirpstack Lorawan system, but I have a problem.
The Joining to the chirpstack sys…
-
Hello I can't seem to get the RNode Configuration Utility to work with the Heltec LoRa32 v2.
When I select it in the list it says "That device type does not exist, exiting now."
![image](https://g…
-
### Describe the bug
I have installed the [BatteryAggregator](https://github.com/pulquero/BatteryAggregator) by [pulquero](https://github.com/pulquero) via Setuphelper and it works fine. There is onl…
-
### Category
Stability
### Hardware
T-Beam
### Firmware Version
2.1.10
### Description
Setting the node to device.role REPEATER asserts after reboot and reboots again and again...…
-
### Describe the problem
Battery SoC is slowly reducing, despite being fully charged. I know there's a "100% reset SoC" function available but I believe only with Bluetooth connection and not RS485 w…
tfboy updated
4 months ago
-
### Describe the problem
Driver does not start up.
### Driver version
v1.1.20231223dev
### Venus OS device type
Cerbo GX
### Venus OS version
v3.00
### BMS type
JKBMS / Heltec BMS
### Cell…
-
HI
I have a "heltec wifi lora32 v3" card and a Rakwireless gateway RAK7268V2 (which I use with the built-in network server option) and I'm trying to send Lorawan packets after the OTAA join.
When I …
-
### Describe the problem
I have 4 JK BMSs and i first connected one. It showed up on the display but then in few seconds it disappears. I tried to troubleshoot and the log shows maybe some crash
w…
-
Hi,
I recently received my two TBeam 1.1 with the new SX1262 LoRa module and it seems that the signal strength calculation is somehow different than with SX1276.
Board Link: https://www.aliexpre…
-
### Category
Hardware Compatibility
### Hardware
Other
### Firmware Version
2.0.10
### Description
Flashed firmware to Heltec V2 and, through the terminal (Using Linux Ubuntu OS) managed to rea…