-
Hi Massimo,
When I use a normal device node, set the "Control" "Telegram type" to "Read" and I send any message to that node it will issue a bus read request and at the same time it will update the…
-
Update des JS Controller auf 5.0.12 durchgeführt
Daher notwendiges Update des KNX Adapters auf 2.0.22
Seit diesem keine Verbindung mehr zum Gateway. Logauszug anbei. Vor dem Update des JS Controller…
-
### The problem
As defined in the KNX Standard Appendix A (defined [here](https://www.home-assistant.io/integrations/knx/#controller_status_address) as `KNX AN 097/07 rev 3`) contains the heat/cool s…
-
Dear,
I'm dealing with these issues:
1) No energy measurement device. So I cannot verify power consumption (Cluster 0B04 + Modbus energy meter)
2) I have some composed devices that have OnOff + Ene…
-
Hi
My log on IOBroker is full with warn messages likes this:
hass.0 | 2022-12-02 09:14:20.723 | warn | State "hass.0.entities.light.eg_eingang.color_mode" has no existing object, this might lead…
-
I tried to upgrade to version 0.14.19-2 unsuccessfully.
I cannot read or write.
command:
knxd -e 0.7.1 -E 0.7.2:8 -u /tmp/knxd -d -DTRS -A retry-delay=1 -A max-retry=2 -i --listen-local=/tmp/k…
-
### The problem
Hello.
I'm trying to configure a KNX value type number and it doesn't work. The rest of the KNX configurations seem to work correctly. I have tried several installations and they wor…
-
Hi Earle,
we habe some problems with the mDNS Service.
```
MDNS.begin(_hostName);
MDNS.enableArduino(8080, false);
MDNS.addService("http", "tcp", 80);
```
For _arduino._tcp. (enableArduin…
-
## The problem
A switch bulb item was created.
If it is switched via MS Edge or Chrome Browser, only the ON command is sent, not the OFF command.
If the item is switched via SAFARI (iPhone), …
-
### The problem
If I add the `time:` and/or `date:` device type to the configuration.yaml it shows an "invalid option" error.
Here my code:
```
knx:
date:
- name: "bus-date"
address…