-
Hi,
I have tried to connect Etherlab igh Ethercat master with OpenPLC using ethercat_src. It is working. I can able to read the slave information by running "Ethercat master command".
![Screensh…
-
Hi,
I am pretty much new to Python and have working experience of around 6 months. I am using Pymodbus Package for Modbus communication. I have primarily 2 issues to deal with and it would be grea…
-
Hi a Nam,
I tested your example code Rak3172 working as **Modbus slave** but it's doesn't work,
I am using your example and **Modbus Poll** working as **master** for reading data from **Rak_v1**
…
-
### The problem
After updating to 2024.2 modbus entities show 'unavailable' until they change state. After restoring to 2024.1.6 modbus works correctly again. (tried 3 times)
![screen](https://git…
-
Hello!
I'm experiencing an issue with communication between my Raspberry Pi 3B+, which is running the Thingsboard IoT Gateway service _version 3.4.5_ over Ubuntu Server _22.04 LTS,_ and the Thingsboa…
-
Thanks for this project! I don't have an Aquarea yet, but am considering it, and one of the factors is the possibility to control it programmatically.
Do you happen to have done more reverse engine…
ariep updated
4 years ago
-
Hello,
New to Deye, but generally not new to electronics or ESP programming. I have recently purchased a 12kW hybrid inverter and it should obviously integrates to HA so this code was on my favorit…
-
Thanks for a simple implementation of the Modbus script. Such a script would be ideal for my project.
But unfortunately, I am unable to connect to the gripper when I run the script. The gripper rem…
-
### The problem
I have declared a modbus configuration without any entity:
```
modbus:
- name: "HAIER-AC"
delay: 1
type: serial
baudrate: 9600
bytesize: 8
method: rtu
…
-
Subscribe to this issue and stay notified about new [daily trending repos in C](https://github.com/trending/c?since=daily)!