-
I have a stock Ender 3 display and its backlight flickers (changes intensity) slightly if hotend or heatbed is powered. I suspect it's a hardware issue - is there any known fix for this?
-
As you know I am very new to Rust language. With your help I just setup Rust environment couple of days ago.
Now I have new feature request. I was searching for IR transmitter solution for CH582F i…
-
**The situation:** It is hot up in the roof of the greenhouse – at least 122 degrees F (50 degrees C).
(also the flashes overheat in the field).
**The problem:**
- box plastic softened to point of co…
-
Some notes for the unsupported LED string lights.
I pulled this apart, and found it had a chip labeled WB3L.
If you decide to pull one apart, don't be an idiot like me and use a knife to cut the…
-
Talk about costs. It seems a bit ambitious
-
Hi, I followed the electrical scheme and the device is working fine and I'm able to control everything via MQTT but whenever the controller is plugged to the pool panel, I'm not able to control the po…
-
Is it possible to have an ESP32 compatible library ?
It would be awsome !
-
In the file "smartcitizen-kit-20/sam/src/SckAux.cpp", in the function `getReading()`, there is a line `if (auxWire.available()
-
Affects the ELED01 and ELED02 PCB's. Could use suggestions from beta kit users that have resistors on-hand to try different values that don't exceed the specs below. We would like to know what light…
-
When I try to read or write a file in a subdirectory it doesn't work. Reading or writing in the root directory works. A different version of the SdFat library (from SuperOteme not in this repository),…
dulsi updated
6 years ago