-
Hello, I am using a NODE MCU 1.0 (ESP-12E Module) with ArduinoJson 6.17.3
I m trying to get a double value from a json payload but the decimal numbers are wrong.
// CODE:
#include
void setup…
-
![image](https://github.com/vroland/epdiy-hardware/assets/52588960/3d4e393e-dbd5-4e24-9f9f-40c592c1298c)
I need some design guidance on converting 40pin to 50pin EPD, and it seems that there are some…
-
Installed the tool and the kernel on UDM (not Pro), and then try to boot the custom kernel.
```
root@ubnt:/# udm-bootctl list
Version Initrd
4.19.152-edge…
-
**EDIT: This turned out to be a issue with the BTT U2C v2.1, a new firmware was released which addresses this issue. I'm closing this out. Here is the link to the firmware which was posted by BTT belo…
-
Good day, Daniel!
Can I use this code with 8266 module (such as Node MCU or Wemos module)?
-
In the file oled.c, where the clock divide ration and oscillator frequency are initialized with the 0xD5 command. The parameter
in the file is "80", but I think it should be the hex value "0x80". T…
-
Now this may not be a problem with this library itself but is anyone experiencing infinite loading times in browsers (both Firefox and Chromium based) when it is deployed on the Pi Pico W?
Given th…
-
## IMPORTANT
Before submitting this issue
[ ] Have you tried using the latest version of the library?
[ ] Have you checked this has not already been submitted and/or resolved?
[ ] If you are reque…
-
http://multimedia.3m.com/mws/media/601670O/rfid-501.pdf
https://www.intechopen.com/books/maintenance-management/rfid-in-libraries-automatic-identification-and-data-collection-technology-for-library…
-
```
uint8_t Adafruit_Fingerprint::downloadModel(uint16_t id, uint8_t packet_1[], uint8_t packet_2[], uint8_t slot) {
uint8_t packet[] = {FINGERPRINT_DOWNLOAD, slot};
writePacket(theAddress, FIN…