-
### Describe the bug, what's wrong, and what you expected.
Normally, mesh color in a plotter can be dynamically updated by changing values within a specified scalars array (related to #5158). However…
-
**Issue by [topaz-bot](https://github.com/topaz-bot)**
_Wednesday Jan 08, 2020 at 15:04:39_
_Originally opened as: project-topaz/topaz - Issue 296_
----
**Issue by [kaincenteno](https://github.com…
-
- I just tried install wifi drivers for Intel Corporation Dual Band Wireless-AC 3168NGW.
```
wget https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi-3168-ucode-22.361476.0.tgz
tar x…
-
I can confirm the whole build procedure does work.
This is my current procedure
20-02-2023
pi os light 64 bit
increase swap
sudo dphys-swapfile swapoff
sudo nano /etc/dphys-swapfile
CONF_SW…
-
### Describe the bug
After upgrading from 20211118 (5.10.63) to 20220120 (5.10.92), CPU governors are not available and the Pi is locked to 600 MHz.
Downgrading to 1.20211118 kernel/bootloader r…
-
I am having an issue where i get "timer too close" at unloading sequence. Print is running fine for a couple of hours with many toolswaps and then suddenly i get this error, always at unloading. I'm r…
-
emsdk misidentifies the system architecture on ARM systems (I'm fairly certain that the arch checks extend as far as 32/64 bit checks), resulting in the incorrect version of node (and presumably pytho…
-
**Describe the bug**
This seems to be similar to this bug https://github.com/raspberrypi/firmware/issues/1409 but has different action. It was tested with a 5.4.45-v8+ kernel, 62fc8c01165a80021054a…
-
I also submitted this issue to sassc-rails (https://github.com/sass/sassc-rails/issues/138).
## How to reproduce:
`$ bundle add sassc-rails` on a raspberry pi 4 (balena 64bit OS 2.44.0+rev3)
##…
ftes updated
9 months ago
-
I have a .NET 5 app, referencing MMALSharp v0.6, building and running on Pi 4 (2Gb) Raspbian Lite, copypasted default motion detection example verbatim from https://github.com/techyian/MMALSharp/wiki/…