-
Hi,
I have a great knowledge of this tutorial: https://hub.mender.io/t/technexion-pico-pi-imx7/136
As can be seen it goes to Zeus (libgpiod version = 1.4)
I need libgpiod v1.6 in my project to …
-
This is a comment rather than a fault. I want to use GP18 and 19 as inputs in a logic analyser application. I love the Maker Pi Pico with its LEDs driven by FETS so they do not create a siginificant l…
-
Add support that when you change the input mode state from for example XInput to Switch mode an addressable led such as ws2812b mapped to a gpio pin will change colour to reflect the mode you are in, …
-
import time
import busio
from adafruit_servokit import ServoKit
kit = ServoKit(channels=16,i2c=(busio.I2C(board.SCL, board.SDA)))
# Tuned for GWS S03T STD Servos
kit.servo[0].set_pulse_width_…
-
### Port, board and/or hardware
all variants that use the framebuf module
### MicroPython version
MicroPython v1.24.0-preview.149.g6007f3e20 on 2024-07-26; Raspberry Pi Pico W with RP2040
### Repr…
hoihu updated
3 months ago
-
I know that the UPS PIco HV3.0 has implemented 2 independent, Time Schedulers. There are:
- the Basic Time Scheduler (BS)
- the Event Triggered RTC Based System Actions Scheduler (ETR SAS)
They…
-
A rp2 state machine instance can be made to fail when the I2S protocol is used.
**Minimal test to reproduce**
The code below uses a PIO state machine to flash the onboard LED on a Raspberry Pi Pic…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
IDM2040-43A is different from IDM2040-7A:
1. Use BT883 ,not BT817
2. No Eve connected flash available
3. Use 480x272 LCD, not 800x480 LCD
-
Is this project [abandoned?](https://github.com/microsoft/pxt-maker/graphs/contributors) Would anyone merge a pull?
samuk updated
2 months ago