-
please update these files for the current kicad as it requires the files in .pro format now
-
## Steps to reproduce:
- In the host Pico-W load [Pico-W AP example](https://github.com/raspberrypi/pico-examples/blob/master/pico_w/wifi/access_point/picow_access_point.c).
- In the second Pico-W l…
-
In the luckfox-config file provided by the SDK, usb OTG option seems to be missing (board compatibility issues?), while it shows in the factory firmware provided for RV1103 (luckfox pico mini b).
It …
-
Hi, i have issue with Adafruit_Floppy (Raspberry Pi Pico RP2040 (philhower core)), using Greaseweazle.
When i try to read ibm.1440 (gw read test.img --device=com14 --format=ibm.1440), floppy drive go…
-
[1] Duplicated LoRa_MOSI, No LoRa_MISO
[2] Is there OLED_RST or LORA_RST or BOTH wired to ESP32 PICO D4?
[2] OLED (SDA, SCL) and other LoRa (IRQ/DI0) pin mapping are unclear due to the two new pull …
fedy0 updated
5 years ago
-
**Is your feature request related to a problem? Please describe.**
The problem is as follows: when I give CVXPY an SDP in primal form to solve with Mosek, it automatically dualizes it and it solves i…
-
Heyo, ran into your work on the discord, had a few questions about your work.
1. which gpio pins are turned into USB using this?
2. if you use the usb pio for split, are both devices visible to the …
-
I use neovim coding c++ recently, and meet cland quit with exit code non-zero some times. LSP log said it is a bug? I don't know if I am the only one experiencing this. Is there a solution?
![image]…
-
My main.py will connect to my mqtt server and Blynk 2 with Thonny on my Mac and also on a stand alone battery,
but will not connect on my ubuntu 22.04 machine.
-----------------------------------…
-
### Describe the bug
I'm doing some tests with Zeno-pico and Zephyr, but using Openthread as the network transport.
On Zephyr Openthread only IPv6 is used on the nodes.
Anyway, after some debug…