-
**Environmental Info:**
K3s Version: 1.18.8
Node(s) CPU architecture, OS, and Version:
Linux k3s-2 4.14.40-sunxi64 rancher/k3s#180 SMP Mon May 14 23:27:03 CEST 2018 aarch64 aarch64 aarch64 GNU/L…
-
### Important Information
- mpv version: 0.34.1-r1
- Linux Distribution and Version: Gentoo GNU/Linux ARM64; Kernel: 5.19.7 (SolidRun Vendor Kernel (https://github.com/SolidRun/linux-stable/tree/l…
-
Hi,
I"m trying to get a JLINK programmer running with the ox64.
First issue I see is - the JTAG pins on the ox64 are also the same pins used for UART0 and UART1.
Is there a way to remap the J…
-
I flashed the current firmware 2.20 with the dfu-util.
That worked fine
I later installed a bootlogo fom this repo, it flashed from the .dfu file but it will not show during boot.
I tried to fl…
-
I create the [blisp-bin package in the AUR](https://aur.archlinux.org/packages/blisp-bin). Currently, it's only for `x86_64`, but I also want made it compatible to `i686`, `armv7h` and `aarch`.
The…
-
I'm attempting to boot this on a rock64 v2 1gb ram. I flashed the image to microsd with balena etcher and connected serial port to terminal on my computer to capture the boot.
I cant seem to get i…
-
- Device: (PinePhone or PineTab?) PineTab
- Kernel Version : $(uname -r) can't tell because the device won't boot
- UI:
### Steps to reproduce
Install system to PineTab, reboot and the…
-
**Describe the bug**
Divide by 0 error because the string in /proc/cpuinfo does not exist outside of Raspberry Pi
**To Reproduce**
1. Run PADD on a non-Pi device - in my case, a Pine64
**Expe…
-
Hey all,
I ordered some hall sensors off of d-key to add the magnetic shutoff to my pinecils. I followed the schematic from the pine64 wiki and ordered the exact Si7210-B-00-IV(R) as listed. The …
-
After the last update on Asahi Linux (pacman -Syu) the kernel is unable to load the BCM4378/3 driver for me.
Asahi: Linux 6.1.0-asahi-2-1-ARCH
Macbook Air M1 8GB/256GB
```sh
artur:ciri [~] > s…