-
Hi,
Thank you very much for your project. It's really great!
I have to admit that the documentation in src/uart.rs (https://docs.rs/rppal/latest/rppal/uart/index.html) is much more clear than the …
manio updated
3 weeks ago
-
Daniel, thank you very much for this project,
I am facing a difficulty at the installation of the docker container. I bring bellow the commands and outputs obtained:
pi@raspberrypi:~/Desktop/Updat…
-
Hi. Trying to get this working on a Rasperry Pi 3 B+ running the latest Raspian OS. Followed the instructions for setting up Dohnut with systemd (https://help.commons.host/dohnut/systemd/), systemctl …
-
I'm using a custom board with CM3, with two smcs9514 chip connected together. Since last week I'm facing with the following problem:
`Aug 13 07:26:09 raspberrypi kernel: [ 143.547999] usb 1-1.5-port…
-
https://github.com/raspberrypi/pico-sdk/blob/6a7db34ff63345a7badec79ebea3aaef1712f374/src/rp2_common/hardware_vreg/include/hardware/vreg.h#L26
I want to set the voltage to 0.80V but realize its not…
-
### OS: Raspbian Stretch on RPi
### Attempt -1, failed
```
pi@raspberrypi:~ $ sudo apt-get update
pi@raspberrypi:~ $ sudo apt-get install git cmake
pi@raspberrypi:~ $ git clone https://github.…
-
installation goes fine, but at the end i got this:
Setting Hostname...
adding the crontab lines
sudo: unable to resolve host raspberrypi: No address associated with hostname
no crontab for pi
s…
-
- [ yes ] I have read the [FAQ](https://github.com/Genymobile/scrcpy/blob/master/FAQ.md).
- [ yes ] I have searched in existing [issues](https://github.com/Genymobile/scrcpy/issues).
**Environme…
-
pi@raspberrypi:/etc/init.d $ sudo service dionaea status
● dionaea.service - LSB: Dionaea Honeypot
Loaded: loaded (/etc/init.d/dionaea; generated; vendor preset: enabled)
Active: failed (Resu…
-
Hallo Diederick! Alvast heel erg bedankt voor de tijd die je in dit project steekt!
I have bought a rapsberry pi 3 and an alfa AWUS036AC. It has chipset 8812au.
On the raspberry pi 3 I have the late…