-
Also, I noticed pins 8,9, and 10 are for channel select, how does that work?
It also calls for a .5 ohm resistor. What wattage?
-
Used a bc547 transistor and 280ohm resistor for speed control between 0 to 255 but when the input is given in serial monitor the speed does not change.
What changes do i need to make?
-
A new TFT35-MZ I recently purchased is missing the LEDs, resistors and capacitors for illumination. Is there a bill of materials for the smd parts or did I receive a defective unit?
-
The spacing on the pins isn't right for the part on the BOM; also lacks a resistor or some other driver since it's not self-oscillating.
-
Steps to reproduce:
- Type in a search query, the slower the query the more obvious the problem will be. `1k` is a great example.
- Click into the Category field and start typing the name of a ca…
-
I just built a DRAM tester with your PCB. Thanks for sharing. I came across an issue with the 12V DC-converter. If I connect the tester the proper way through the Arduino I get only about 5V out of th…
-
I am interested in lc-oscillator. I would like to know how to calculate frequency output.
thanks you.
-
I am struggling with the combination of Octopus Pro & MicroProbe V2.0.
Is there anyone out there who has gotten it to work well?
-
Hi,
I'm creating a PCB for this that I plan to make available, but I have a question.
When you don't have a variable resistor, what values do you use for R7 and R8? The same as R6? (Based on the…
-
@ElDominio all Nissan boards have three 120R resistors in parallel which is technically not good
at least one 120R should be removed from every board