-
I'm getting this error:
_tls_common.js:273
c.context.loadPKCS12(buf);
^
Error: ca md too weak
at Object.createSecureContext (_tls_common.js:273:19)
at Obje…
-
Hi!, I found 2 big problems in the UPS:
1. If leave UPS in off state UPS continue to discharge the battery on itself (pogo output 0.42 Volts). So after some days the battery discharges to 0 Volts wi…
-
## Platform
I’m using:
* gokrazy/rpi3b
* gokrazy/rpi3b+
* gokrazy/rpi4b
* ... and also gokrazy/rpi400
## Observed behavior
The Raspberry Pi 400 seems to mostly work. Everything except w…
-
# Info
- Which version of Pi are you using: Raspberry Pi Zero 2W
- Which github revision of software: v23.11.01
- Which board version: Fullspec 2.3a
- Which computer is the PiSCSI connected to: …
-
Hi @thewh1teagle Good to see your contribution for this library.
I am using zero-hid for the emulating mouse actions. For Hardware I am using Raspberry pi zero W. I want to use RPI as USB device …
-
With kms-driver (which is the default) there's no working sound support. I can get sound to work as soon as I install pulseaudio, but without it, no sound.
-
I was running "rpi-update" on my Pi Zero 2 and it seems like its not able to reconnect to the wifi when it is one once. My Pi is driving over my place and switching between three AP with a AVM mesh.
…
-
Hi ! Trying to get your module to load, but didnt work so far. In the debugging screen of MM i get this error message.
![grafik](https://user-images.githubusercontent.com/22378822/82060270-7099b000-9…
-
Hi, I had the problem that background images never showed up. By reading through the closed issues I saw someone using "modules/MMM-BackgroundSlideshow/exampleImages/" instead of the path 'modules/MMM…
jowe2 updated
4 years ago
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…