-
Hi, i can't figure out how to declare pin for tx and rx, i can find only the DE/RE pin
Can you explain?
Thanks!
Alessandro
-
#### Description
Firmware update can be operated over protocols than CoAP and VFS.
For instance, additional transport can be HTTP, FTP, RS485, CAN ...
SUIT framework should be extensible with c…
-
This is not good. Catena-Arduino-Platform doesn't know how to turn on power on FRAM on the 4801 (or other devices that have FRAM power). This needs to be fixed, and examples must be updated to remove …
-
What are the benefits of an updated DMX standard to already established open industry standards like:
Artnet
- UDP Unicast/Broadcast based
- Multiverse
- (somewhat limited) Device discovery
R…
-
Please add support for [TMP107](https://www.ti.com/product/TMP107) Temperature Sensor with Daisy-Chain UART, EEPROM, and Alert Function
I find library for arduino may be it help impelement support of…
-
Hi,
I have gotten a uhf rfid serial based on your documentation i have gotten a same one in the following link,
https://www.aliexpress.com/item/UHF-RFID-card-reader-6m-long-distance-range-with-8db…
VanQz updated
6 years ago
-
Hi @Sleeper85,
I have just made a change on my git. Could @widget4145 try with this change?
_Originally posted by @txubelaxu in https://github.com/Sleeper85/esphome-jk-bms-can/issu…
-
First, thank you for sharing the project. I really want to be able to apply it in my fancoils installation. Could you help me with the connections? I have put the TX and RX of the Wemos d1 Mini to a T…
-
Hi, I'm trying to implement the RS485 communication with the AASD-15A driver series. I'm using a 60st-01932 servo but communication with the driver remain the same. First thank for sharing your first…
-
Hi
I am on macOS 10.12 with Arduino 1.8.5
I followed the sparkfun guide to install all 3 libraries and add the board to the IDE.
But when i compile the example code i get this error message:
…