-
Can't get my E0 - E1 to work
I have received 2 death 2130 drivers, so i am trying to run my SKR 1.3 bort like..
```
#define X_DRIVER_TYPE TMC2130_STANDALONE
#define Y_DRIVER_TYPE TMC2130_STANDAL…
-
### Description
It would be good to have CHOPPER_09STEP_12V similar to CHOPPER_09STEP_24V.
I'm looked for some documentation on how to define properly CHOPPER_TIMINGs for 0.9 degree motors running…
kad updated
10 months ago
-
```
What steps will reproduce the problem?
1. Call tone(13,31). You will see a very fast blinking on the LED.
2. Call tone(13,30). You will see a seemingly continuously lit LED (it actually
is a very…
-
```
What steps will reproduce the problem?
1. Call tone(13,31). You will see a very fast blinking on the LED.
2. Call tone(13,30). You will see a seemingly continuously lit LED (it actually
is a very…
-
Hi Guys
Generally I use a manual 4 corner bed level on my 3d printers as I feel I can get a better level given my beds at 420 x 420mm are usually larger than the average printer. Also because I usu…
-
Can I replace the screen from your project by this https://aliexpress.ru/item/4000302982264.htm ?
May be you have list of compatible screens?
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Hi Guys,
I use an idex .
Everything Wirkung fine.
I have a Problem with e1.
e0 he…
-
Good day James.
Please are you able to assist me.
I am struggling to get my Leadscrew sorted out. With the coding of the correct hmm setting and microsteps
I have the following components:
…
-
Hi everyone, I bought two tmc5160 from bigtreetech more specifically these https://www.biqu.equipment/products/bigtreetech-tmc5160-v1-0-driver-spi-mode-silent-high-precision-stepstick-stepper-motor-dr…
ghost updated
2 years ago
-
Good night,
I just installed the module on my own stepper as DIY.
I have changed in configuration from original UART 2209 to A5984, also removed UARt jumper and installed all harware.
I move …