-
The attached sheets were pulled directly from ST's webpage:
"ClariusHD3_GyroscopeAccelerometer_ST lsm6ds0.pd" is the datasheet for the 3D accelerometer and 3D gyroscope in the Clarius HD3 ultrasoun…
km414 updated
9 months ago
-
-
After successfully compiling my STM32 L476RG program with the Visual Micro Extension for the Arduino IDE
```
Program STM32-L476RG size: 21352 bytes (used 2% of a 1048576 byte maximum) (2,00 secs)…
-
Problem in
[https://github.com/STMicroelectronics/STM32CubeF3/blob/master/Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash_ex.c](url)
**Describe the set-up**
- STM32F302CCT6 on custom HW
- S…
-
Inside I2C_IsErrorOccurred, if I2C_FLAG_STOPF is never cleared, the timeout will never occur, since the error doesn't break out of the loop.
https://github.com/STMicroelectronics/STM32CubeL4/blob/26b…
-
**Describe the set-up**
N/A - it's a poor release management issue on STMicroelectronics side.
**Describe the bug (skip if none)**
The latest release v1.0.5 for generation V1 BSP's is not ref…
rexut updated
8 months ago
-
Hi all
I try to implement the communication to a SPI device using a different protocol as your SPI chips, and is a pain. The eLooM framework is over engineered for C, why not to do it in C++?
-
The original source code this repository is based upon calls the lock function (the equivalent of ENTER_FF macro) prior to calling the disk_status function. The inverted sequencing in the current impl…
-
**Caution**
The Issues are strictly limited for the reporting of problem encountered with the software provided in this project.
For any other problem related to the STM32 product, the performance, …
-
Which one should we use? This one or the code here? https://github.com/STMicroelectronics/x-cube-tcpp/tree/main/Middlewares/ST/STM32_USBPD_Library/Devices/STM32G0XX
There are slight differences.
…