-
Hi @fennifith,
I was looking for an open source clock app and found yours is the closest to what I'm after. In particular what your app does which another open source app doesn't is have the option…
-
first,**I use the master branch code.**
cargo.toml
```
[package]
name = "esp32-mipidsi-test"
version = "0.1.0"
authors = ["song "]
edition = "2021"
license = "MIT OR Apache-2.0"
[dependenci…
-
I test with esp32s3 on v5.2.2-163-gf81b598d10.
My device is running as an AP and I notice init camera has large impact on networking.
e.g.
Without camera init:
$ ping 192.168.10.1
PING 192.16…
-
# ESP32-P4 support status in ESP-IDF
ESP-IDF v5.3, currently in development, will include initial support for the mass production version of the ESP32-P4 chip.
In the list below, supported featu…
-
Hello,
first of all I wish to thank you for what you are doing on this project.
I noticed that the clock information is not reliable, time calculated by the device runs faster than conventional time…
-
Just wondering if it would be possible to use this with an RTC library instead of the time library.
at the moment my time is obtained by rtc.now();
I could set the internal time of the arduino usi…
-
```
It would be useful to define alarms as a period of time. Under "Add Alarm"
you could add a third state to the AM/PM toggle (maybe blank?). Each time the
alarm is enabled the activation time w…
-
```
It would be useful to define alarms as a period of time. Under "Add Alarm"
you could add a third state to the AM/PM toggle (maybe blank?). Each time the
alarm is enabled the activation time w…
-
```
It would be useful to define alarms as a period of time. Under "Add Alarm"
you could add a third state to the AM/PM toggle (maybe blank?). Each time the
alarm is enabled the activation time w…
-
```
It would be useful to define alarms as a period of time. Under "Add Alarm"
you could add a third state to the AM/PM toggle (maybe blank?). Each time the
alarm is enabled the activation time w…