-
Since we've committed to USB-PD output, it'd be nice to actually implement it at some point.
The problem is, each user may have different expectations for this port. Someone may mistake it for a po…
-
### Describe the Bug
I have a Sofle split keyboard with a KB2040 on each side, connected to a dual-boot PC with Ubuntu 22.04 and Windows 11. It is connected to a USB hub in my monitor (Dell S2721DG…
-
Is it possible to use this hardware as a source and if so what software changes would be needed to support it?
To avoid an XY-problem, I have a solar USB-PD controller that advertises 20V even when…
-
placeholder issue to discuss the support of VBus/LAN
-
**Is your feature request related to a problem? Please describe.**
I'm a hardware verification engineer and use your project (or sometimes a standalone Raspberry Pi) for controlling some tests. One o…
-
I've connected an analog circuit which depends on differences in small microampere area to some Pins of the Pico.
Without any connection on the SWD pins it works.
As soon as I connect the Pico D…
-
I have noname VL817 hub that I modified to support vbus control.
But power switching works only if hub is connected to USB2 uptream only.
For USB3 connection power off command is ignored.
Log wit…
-
Hi.
I've spent about 2 days trying to get my Lilygo T-SIM A7670E to read an SD card.
- I have tried a total of 8 different SD cards, ranging from 256MB to 32GB, from a range of different manufac…
-
Just installed uhubctl and tried it for my USB Hub, switching power off and on per-port works as desired.
USB- Hub : Startech USB-A Hub [Model No. HB30A4AIB]
uhubctl Model Output: [2109:2817 VIA L…
-
**Describe the bug**
I try to compile a sample of a USB device for nrf5340. No one of them work as it should. For example cdc_acm is not detectable by host's USB driver. There is what I am doing …