-
Dear all,
I haven't yet figured out how to trigger changes from Home Assistant to the Wallbox, version 2.
For example, I'd like to change from PV --> Sofortladen charge mode.
I figured out that t…
-
## Expected Behavior
Changes in item `maxpresetcurrent` are transferred to the KEBA wallbox and the charging power is changed accordingly.
## Current Behavior
We set the value of the item on a si…
-
### Describe the bug
Wenn der Akkustand der Hausbatterie über "Fahrzeug zuerst" % in den Batterieeinstellungen liegt, lässt sich die Steckdose nicht mehr über den UI Button Aus ausschalten.
Die Stec…
-
If secondary Wallbox is configured and not reachable, the first stopps working after restart of HA.
The Error is "error on initialize".
The Entities are there, but changing them stopps working. Even…
-
My MQTT based grid sensor is WLAN based and there is the possibility that the "Power Saldo" which I use for pGrid in the "PV Surplus Charging" automation could get unavailable (e. g. no data received …
-
### The problem
With the release of 2023.11 the min_value of the Set Charging Current component has changed. This should be 6 when not bi-directional, it is now 0.
### What version of Home Assistant…
-
I have followed the add on method however I cannot get to the stage where prebat creates a dashboard entry in the log.
My inverter is the SUN2000 with 10 kWh battery.
2024-07-27 23:00:00.273591…
-
Es gibt die verschiedensten Möglichkeiten, eine Phasenumschaltung zu automatisieren..
Eine manuelle Umschaltung ist nicht komfortabel und benötigt immer wieder die Aufmerksamkeit des Betreibers der…
-
Splitting this out to separate request.
Please add support for Solax inverters.
I use https://github.com/wills106/homeassistant-solax-modbus for HA integration (also supports other brands of inverte…
-
Hi,
two days ago it worked perfectly, suddenly I only get this readings:
INFO:sensors:Unknown sensor: pconsume
INFO:sensors:Unknown sensor: psupply
INFO:sensors:Unknown sensor: u1
INFO:sensors:…