-
Thank you for the great node!!!
Is there a way to reset the three daily counters (counters.totalEnergyToday, counters.pv1TotalEnergyToday, counters.pv2TotalEnergyToday) using this node? In my Setu…
-
### The problem
OTA Update works one out of hundred times - it just times out normally. Sometimes it shoots up to 60%, sometimes it goes up to 12% and times out - OTA is impossible. Unfortunately thi…
-
Is this logger type supported?
I have Sofar Solar inverter with this logger.
Auto search find my logger ip and serial, send packet but after few seconds i got timeout and no response. Tried to s…
-
When an operation relying on BDD (javabdd) is launched, like counting, the program stops and raises an exception...
The verbose mode suggests that something goes wrong with the "loggers"
(see below: …
-
T-Relay S3 supports up to 3 expansion boars to have up to 24 relays.
I'd like to ask for an example with an expansion board, so it will be easier for beginners (like me) to get started.
Also, do I…
Misiu updated
5 months ago
-
Hi!
I was using SwitchBot-MQTT-BLE-ESP32 with Home Assistant and till now everything was ok, no error, no warning. From yesterday, when I updated Home Assistant to a newer version, I got this warni…
-
### The problem
At this stage the situation is like this.
If the air conditioner is turned off.
and press "SMART" on the remote control
![image](https://github.com/esphome/issues/assets/98225056…
-
-
Do I have to adjust the data here?
Unlike what is normal in yaml, here are the parameters in the
bunicutz_AC.h.
midea_AC.h#include "esphome.h"
#include
define DI_PIN 16
define RO_PIN 17
…
-
I'm looking to port my Modular Sensors based code over to an Arduino Portenta H7, which has a STM32H7 cpu. Is there a starting point you'd recommend for adding to the library to make it work for this …