-
### Link
https://www.amazon.com/innr-Zigbee-Philips-SmartThings-Dimmable/dp/B0CHM7WJXD?th=1
### Database entry
"id":29,"type":"Router","ieeeAddr":"0xa4c1380908e57e3b","nwkAddr":26592,"manufId":4454…
-
### The problem
I am using a Zigbee-enabled pet feeder from Aquara for feeding my pet. I am also retrieving the amount of portions fed.
After I dispense food via the HA action or pressing the butt…
-
### What happened?
I have a VA4220ZB with flow sensor. The device is natively supported in Z2M, but does not include flow sensor capability. I created an external converter which adds this, but Z2M a…
-
Bonjour,
Je suis en train de paramétrer le Lixee fraichement recu
Il s'est bien appairé au réseau et possède une très bonne connexion avec un LQI de 255 et un RSSI de -25 :
![image](https://user…
-
Had the following firmware installed: [Z03MMC_v0120.bin](https://github.com/pvvx/ZigbeeTLc/blob/master/bin/Z03MMC_v0120.bin)
Now used the following file for OTA updates: [1141-020a-02053001-Z03MMC.…
-
### The problem
Since 2024.8.0, `remote_button_short_press` event on an lumi.sensor_switch.aq2 trigger twice the automation.
It does this with 3 differents buttons.
I can see in the log panel of th…
-
@ciotlosm Can I suggest that you try to reach out to @slaesh (via or [Telegram](https://t.me/slaesh)) about teaming up to test and if possible also develop support his CC2652RB development sticks wit…
Hedda updated
3 years ago
-
> Hi,
I'm running Home Assistant in the last version with a POPP Key (EFR32MG13) and everything running fine but could not connect with the elelabs-ezsp-utility :(
I've let all the info I get ju…
-
### What is the version of your ORAS CLI
1.2.0
### What would you like to be added?
I could not find it anywhere written in the docs if oras pull cleans up the output directory or tempfiles in case…
-
### The problem
I detected a big increase in my log files size, and it seems the ZHA component is been set to a logging level of DEBUG. I checked the defaults at https://github.com/home-assistant/cor…