-
### The problem
Zigbee devices (using ZHA integration) no longer respond to state changes (eg switch on / off).
I believe this is linked to updating to the latest version (2022.9.4) however cannot b…
-
### Description of the issue
Hi,,
i have a zigbee sensor (lixee) on my electric board and solar panels for my personnal consumption.
when solar panels have a higher value in VA between my consump…
-
### Describe the issue you are experiencing
I'm having a boot-loop issue with SkyConnect (Thread only) running on HAOS on a Pi4.
Anecdotally it seems to be worse with more devices on the mesh.
I cu…
-
### What happened?
In the past 1-2 months, my Zigbee network has sporadically gone offline, until I restart z2m. In some cases, I also have to restart some of my routers (assortment of Philips Hue li…
-
@grobasoz @MattWestb Any throughs on this? -> https://github.com/zigpy/zigpy/discussions/1042
Hedda updated
2 years ago
-
### SOLVED: The problem was a RX track cut just where it joins the pad. I was very careful when soldering. Used a very thin wire and smd solder iron, but it seems a defect on the track itself. **Worth…
-
zigbee2mqtt is loosing connection to the adapter every once in a while (~ every 3-4h) and reconnects to it after about 10s:
```
zigbee-herdsman:adapter:zStack:znp:log Socket error +2h
zigbee-…
-
Hi,
I bought a Conbee and I finally received it so I’m eager to play with it :)
I have a RPi (version 1) at home but it is already being used and I am concerned it may not be powerful enough to …
-
# !!!! Important !!!!
For general assistance using this project please review the [Q&A Discussion](https://github.com/tsightler/ring-mqtt/discussions/categories/q-a) group and, if your question is un…
-
### The problem
For some reason a massive negative(!) “production” bar appeared on my energy dashboard:
![](https://community-assets.home-assistant.io/original/4X/3/9/1/391db9c6720891c1a499551fc…