-
### Problem description
The TS0601 is not supported now. When connected, it shows no entities.
The current workaround is to use the device through Tuya integration(and Tuya gateway).
I would pref…
-
### What happened?
Clicked to check for updates for all devices (`Check all` button) and found nodejs crashed like this:
```
Zigbee2MQTT:info 2024-01-31 17:58:39: MQTT publish: topic 'zigbee2mqtt/…
-
### What happened?
Hello,
before the activities of this morning, all the infrastructure were working very fine since many months, Z2M ok, MQTT ok, HA ok, no issue.
This morning I did a Proxmox …
-
### What happened?
In my zigbee network there are also 8 PTM 215Z switches (greenpower).
They work correctly when Permit join = true in settings of the GUI or when I press the Permit Join in the GUI…
-
I am using Zigpy via the ZHA component in Home Assistant. I have set it up with my CC2531 USB stick running the latest Koenkk v1.2 source routing coordinator firmware.
Throughout the duration of th…
-
### What happened?
Have a new Styrbar remote control to add to my Z2m network. Attempting to add via the Z2m dashboard in Home Assistant I get the error: Interview failed because can not get active…
-
### What happened?
I was adding a Aqara T1 door & window contact sensor to my network. and after the interview was done, the device is responing N/A in Contact, Battery and Voltage.
i have tried re…
-
**Describe the bug**
In my case Zigbee coordinator (via USB) was connected and working, but socket saying "No connection".
**Device information**
![Screenshot 2024-06-28 at 13 00 46](https://gith…
-
### What happened?
```
Error: DatabaseEntry with ID '24' already exists
at Database.insert (/data/zigbee2mqtt/node_modules/zigbee-herdsman/src/controller/database.ts:40:19)
at Device.und…
-
Hi folks,
I'm having some issues pairing LEDVANCE MotionSensor+ devices using Home Assistant Zigbee integration.
It starts fine with detecting the device but during "configuration" there is no…